The Approved Cables Initiative (ACI) has issued a warning concerning cables which are being offered for use, and in some instances, installed in fixed wiring applications in the UK that don’t comply with standards they claim to meet

Under the provisions of the UK Wiring Regulations (BS 7671) certain types of cables, meeting British Standards (BS) or UK adoptions of European Standards (BS EN) are designated for use in fixed installations. Their proper selection and use can be part of ensuring compliance for the full system.  Where an installer chooses to use a cable not selected from one of the designated standards, he must satisfy himself, and any independent inspecting authority, that an equivalent level of safety is ensured.

ACI, however, continues to find evidence of cables being used and being offered for use in UK fixed wiring applications that claim to meet these or other standards and, more significantly, when tested do not comply with the provisions of those standards.

Recent examples include so-called NYY cables claiming, via external marking, to meet IEC 60502-1, and a so-called CY cable claiming, via its external marking, to comply with BS EN 50525-2-11. When independently tested, the former showed that the thickness of the outer sheath was significantly below that required by the standard, and with the latter the construction and marking did not conform to the requirements of the standard.

BS EN 50525-2-11 specifies harmonized flexible cords such as H05VV-F (318_Y in CMA coding).  Low smoke, halogen-free equivalents are in BS EN 50525-3-11.  Cables designated SY, YY or CY are designed for instrumentation and control purposes.  They often have lower insulation and sheath thicknesses by comparison with the BS EN flexible cords, and/or taped beddings.  As such they would not conform to the harmonized standards, and should not claim to do so via a BS EN marking as this is a fraudulent claim.

The best way to ensure compliance with the Wiring Regulations in respect of the cables to be used is to:

  • Select only those standard cables called up in BS 7671
  • Look to see that the external marking includes the manufacturer’s name, the number of the British Standard for that cable (or the correct cable code), the other details such as voltage rating and conductor size, and that no other ambiguous marking is present
  • Look for a 3rd party mark of approval such as BASEC or HAR.

Further information about the ACI can be found at www.aci.org.uk