Hylec-APL has recently introduced its new Kwik Fix cable gland range that is suitable for applications where access to the interior of a bulkhead or enclosure is restricted. The Kwik Fix is installed from just one side of a panel, doesn’t require a rear mounted locknut and can still achieve IP68 sealing of a cable transit. The range is especially well suited for use with large switch cabinets and cooling and heating systems.
Dome topped glands have traditionally been the gland of choice of plant and mechanical engineers as rapid assembly products generally require a special tool for assembly, are often awkward to install and form an unreliable seat. However, there are times when access to the inside is restricted and traditional solutions are awkward to install.
The Kwik Fix cable gland can be attached to any bulkhead or enclosure in three quick steps, with access to only one side and no specialised tools. Firstly the base of the gland is inserted through the entry and the mounting foot is positioned against the internal wall. An external hexagonal locking nut is then turned anti-clockwise to hold the gland in place and form an IP68 seal. Finally, once locked into position, the cable can be installed in the traditional manner – tightening the cap nut in a clockwise direction.
This means that the gland can be easily mounted and dismounted from one side making installation and maintenance far simpler. In addition, the gland takes up less internal space which gives greater space for internal wiring etc. The gland can be fitted onto entries where the wall thickness is between 1mm and 4mm and will maintain an IP rating up to IP68 safely in temperatures between -20°C and 100°C. It also has an integrated strain relief and is suitable for all standard hole sizes (M16, M20, M25 and M32).
Terry Spriggs, product marketing manager for Hylec-APL, said, “While traditional cable glands are ideal solutions for many electrical installations, we realise that every application has its own unique consideration which is why we stock many entry solution components – from grommets to ATEX rated glands. The Kwik Fix adds a further dimension to our cable gland range, offering easy installation for applications that would be traditionally awkward. The Kwik Fix can reduce installation time significantly, which in turn directly increases productivity and therefore profits.”
The Kwik Fix is especially suited in all kinds of control cabinets, switchgear construction, building services and HVAC applications.
Hylec APL
T: 01933 234 400
